• How far I've come...

    From Dumas Walker@VERT/CAPCITY2 to MRO on Tue Jan 31 15:34:00 2023
    i've been told not to sweep when i have nothing to do. i was told to drink at bar during our breaks (no prob with that!), i was told that i was not allowed
    work for a 2 week period during the holidays because i was not in the union y
    . unions just hold people back now.

    I worked in a union shop for a couple of years but, as office staff, we
    were not union. The union really sold their employees out. There had a
    been a big strike there a couple of years before I started. One day, the
    HR manager from that time came in and a bunch of the union guys were
    hugging on him like a brother. I asked one of them about it later... like,
    you know, since he would have been management during the strike. He told
    me the strike taught them who really cared about them (the HR manager from
    that era) and who didn't (the union, the current HR manager).

    There were still a few die-hard pro-union workers while I was still there,
    but most of them were only in it because they had to be in order to work
    there.

    I got laid off in 1996. The plant was closed by 2000, with only a skeleton sales staff left over.


    * SLMR 2.1a * Ethernet: A device to catch the Ether Bunny.

    ---
    ■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From MRO@VERT/BBSESINF to Dumas Walker on Tue Jan 31 17:22:36 2023
    Re: How far I've come...
    By: Dumas Walker to MRO on Tue Jan 31 2023 03:34 pm

    There were still a few die-hard pro-union workers while I was still there, but most of them were only in it because they had to be in order to work there.

    I got laid off in 1996. The plant was closed by 2000, with only a skeleton sales staff left over.


    i was a heat treater and the place got sold and they got laid off with very little warning. they spaced out the layoffs, but eventually the people with the most senority were gone.

    a lot of guys didn't take it so well because it was during a recession and it was almost impossible to get a job. i hit the ground running and had another job lined up but most people didn't. one guy had a kid on the way and he came in begging for handouts. The guy who trained me and knew everything became an even bigger alcoholic and just got drunk every single day and lived off unemployment until it ran out. I'm pretty sure he's dead.

    On the last day I actually left early and they later told me the supervisor didn't like that and said i wouldn't be back. NOBODY was back, not even him. fuck that motherfucker.

    Years later i applied at another heat treater and the guy who interviewed me was from my old job. he was an ass to me and didn't give me a shot even though i could have done the work easy. There is no real union brotherhood.

    I learned at a young age to hit the ground running and work hard and keep working. When i first got into the workforce in the 90s i saw how the jobs were going away overseas. I saw the people crying because they had no future and didn't plan. they stuck it out with the company even though they knew things were in trouble.

    I know a lot of these guys in bbsing work office jobs and think they are better than manufacturing people like me. They wouldn't last long mentally or physically in the stuff i've done. I've fired college boys with no common sense many times.
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Gamgee@VERT/PALANT to MRO on Wed Feb 1 07:39:00 2023
    MRO wrote to Dumas Walker <=-

    There were still a few die-hard pro-union workers while I was still there, but most of them were only in it because they had to be in order to work there.

    I got laid off in 1996. The plant was closed by 2000, with only a skeleton sales staff left over.

    <SNIP>

    Years later i applied at another heat treater and the guy who
    interviewed me was from my old job. he was an ass to me and
    didn't give me a shot even though i could have done the work
    easy. There is no real union brotherhood.

    Or maybe he just knew you were a prick and didn't want you in that
    company.

    I know a lot of these guys in bbsing work office jobs and think
    they are better than manufacturing people like me. They wouldn't
    last long mentally or physically in the stuff i've done. I've
    fired college boys with no common sense many times.

    You make a lot of assumptions, and they're almost always wrong.

    Oh, and common laborers working for barely-above-minimum-wage (like you)
    don't get to fire anybody.



    ... Ignorance can be cured. Stupid is forever.
    --- MultiMail/Linux v0.52
    ■ Synchronet ■ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
  • From Dumas Walker@VERT/CAPCITY2 to MRO on Wed Feb 1 16:18:00 2023
    I know a lot of these guys in bbsing work office jobs and think they are
    ette
    than manufacturing people like me. They wouldn't last long mentally or
    hysic
    ly in the stuff i've done. I've fired college boys with no common sense many mes.

    There is nothing wrong with manufacturing and other non-office work. Those
    are the folks who are usually the ones that actually make things happen.


    * SLMR 2.1a * I got everything but the part after "Now listen closely."

    ---
    ■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From MRO@VERT/BBSESINF to Dumas Walker on Wed Feb 1 17:03:51 2023
    Re: How far I've come...
    By: Dumas Walker to MRO on Wed Feb 01 2023 04:18 pm

    I know a lot of these guys in bbsing work office jobs and think they are
    ette
    than manufacturing people like me. They wouldn't last long mentally or
    hysic
    ly in the stuff i've done. I've fired college boys with no common sense many mes.

    There is nothing wrong with manufacturing and other non-office work. Those are the folks who are usually the ones that actually make things happen.


    At my old job we had guys with business degrees who ran cnc and made more money than their bosses.

    A lot of people look down upon manufacturing. not everyone can sit in an office. Things need to be produced. i was half office and i hated it.
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Nightfox@VERT/DIGDIST to MRO on Wed Feb 1 17:15:51 2023
    Re: How far I've come...
    By: MRO to Dumas Walker on Wed Feb 01 2023 05:03 pm

    A lot of people look down upon manufacturing. not everyone can sit in an office. Things need to be produced. i was half office and i hated it.

    I don't think I've known anyone who has looked down on manufacturing. We need manufacturing in order to make/build things.

    Nightfox

    ---
    ■ Synchronet ■ Digital Distortion: digitaldistortionbbs.com
  • From MRO@VERT/BBSESINF to Nightfox on Wed Feb 1 20:41:24 2023
    Re: How far I've come...
    By: Nightfox to MRO on Wed Feb 01 2023 05:15 pm

    Re: How far I've come...
    By: MRO to Dumas Walker on Wed Feb 01 2023 05:03 pm

    A lot of people look down upon manufacturing. not everyone can sit in an office. Things need to be produced. i was half office and i hated it.

    I don't think I've known anyone who has looked down on manufacturing. We need manufacturing in order to make/build things.


    oh i'm sure you have.
    i'm sure you've seen i there. there's a troll here who tried to talk
    shit to me about working in a warehouse.

    Some of the smartest people i've known work in manufacturing and some of the dumbest people i've known work in offices.
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Cougar428@VERT to DUMAS WALKER on Thu Feb 2 09:57:00 2023
    Quoting Dumas Walker to Mro <=-

    There is nothing wrong with manufacturing and other non-office work. Those are the folks who are usually the ones that actually make things happen.

    Without the people who actually create the product, no one else's
    job would really matter would it? Once the product is manufactured,
    then it moves on to the rest of the system to process (box, ship and
    sell).

    Cougar


    ... Does the name Pavlov ring a bell?

    ___ Blue Wave/QWK v2.20
    ---
    ■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net
  • From Dumas Walker@VERT/CAPCITY2 to MRO on Thu Feb 2 16:51:00 2023
    A lot of people look down upon manufacturing. not everyone can sit in an
    ffic
    Things need to be produced. i was half office and i hated it.

    Yeah, I have never figured out how people can look down on the ones that
    are doing the "real" work. :)


    * SLMR 2.1a * Florida bumper sticker: DON'T SHOOT! I'M LOCAL!

    ---
    ■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Dumas Walker@VERT/CAPCITY2 to NIGHTFOX on Thu Feb 2 17:08:00 2023
    I don't think I've known anyone who has looked down on manufacturing. We
    eed
    anufacturing in order to make/build things.

    I think most people with sense don't think that way. I worked in an office
    at a manufacturing plant for a few years, and there were a few here and
    there that did look down on the floor guys as a whole. There were others
    that were married to them. :)

    OTOH, the way some politicians (and some of their die-hard followers) act,
    I am pretty sure there are still people who look down on manufacturing, at least certain types of it.


    * SLMR 2.1a * Rate yourself as a programmer on a scale of 0 to F.

    ---
    ■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From MRO@VERT/BBSESINF to Dumas Walker on Thu Feb 2 18:42:20 2023
    Re: How far I've come...
    By: Dumas Walker to MRO on Thu Feb 02 2023 04:51 pm

    A lot of people look down upon manufacturing. not everyone can sit in an
    ffic
    Things need to be produced. i was half office and i hated it.

    Yeah, I have never figured out how people can look down on the ones that
    are doing the "real" work. :)



    We had this new production manager that was danish and he refused to even talk to workers. he was very odd. in one department he wanted to observe them doing their jobs but he told them not to speak to him. this was a lean mfg guy who was going to fix everything.

    All we ended up having was shitloads of meetings. one guy yawned during a meeting and he sent him in for a drug test. the guy passed it and asked why he did that. martin asked why he yawned. The worker told him he was tired because they are working long hours and weekends. He was sent home with no pay.

    eventually martin the production manager was caught looking at men in the bathroom stalls. He did it to the wrong guy, someone who was there for 40 years.

    Martin eventually got fired. I looked him up and he was only at his past employers for 1-2 years. With us he didn't make it 1 year. He has been doing this shit for 15 years in our country and places keep hiring him.

    Now he's a director of engineering in another city. how do these people even keep getting work?
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From MRO@VERT/BBSESINF to Dumas Walker on Thu Feb 2 18:43:36 2023
    Re: How far I've come...
    By: Dumas Walker to NIGHTFOX on Thu Feb 02 2023 05:08 pm


    OTOH, the way some politicians (and some of their die-hard followers) act,
    I am pretty sure there are still people who look down on manufacturing, at least certain types of it.


    at my old job polticians would come and visit to do a photo op. the news stories made it seem like they were there for the whole day answering questions. they were just there for minutes.
    just enough time to get a buch of photos
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Margaerynne@VERT/PALANT to Cougar428 on Thu Feb 2 20:31:09 2023
    Re: How far I've come...
    By: Cougar428 to DUMAS WALKER on Thu Feb 02 2023 09:57 am

    Without the people who actually create the product, no one else's
    job would really matter would it?

    Manufacturing makes the product, logistics makes it worth something


    At this point, everyone is reliant on everyone else. I'd be useless without
    manufacturing/research, but they'd be wasting absurd amounts of time and
    energy without proper spreadsheets and automation

    I do my job, they do theirs, and we all benefit.

    ---
    ■ Synchronet ■ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
  • From MRO@VERT/BBSESINF to Margaerynne on Thu Feb 2 21:42:31 2023
    Re: How far I've come...
    By: Margaerynne to Cougar428 on Thu Feb 02 2023 08:31 pm

    Re: How far I've come...
    By: Cougar428 to DUMAS WALKER on Thu Feb 02 2023 09:57 am

    Without the people who actually create the product, no one else's
    job would really matter would it?

    Manufacturing makes the product, logistics makes it worth something


    At this point, everyone is reliant on everyone else. I'd be useless without
    manufacturing/research, but they'd be wasting absurd amounts of time and
    energy without proper spreadsheets and automation

    I do my job, they do theirs, and we all benefit.

    that's not always the case. i worked at an old company that was like a broken record. any new people fucking hated it. customer service, buyers, you name it. They just kept doing the same shit in the same old school way and all these new people would just quit.
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Dumas Walker@VERT/CAPCITY2 to MRO on Fri Feb 3 15:39:00 2023
    Now he's a director of engineering in another city. how do these people even ep getting work?

    Either people don't check references, or the references lie.


    * SLMR 2.1a * !edis gnorw eht morf siht ta gnikool era uoY

    ---
    ■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From MRO@VERT/BBSESINF to Dumas Walker on Fri Feb 3 17:07:26 2023
    Re: How far I've come...
    By: Dumas Walker to MRO on Fri Feb 03 2023 03:39 pm

    Now he's a director of engineering in another city. how do these people even ep getting work?

    Either people don't check references, or the references lie.


    i think all they can do is really ask a previous employer what their position is and how long they worked there.

    someone can provide references, but those people would just lie for them usually, right?
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Moondog@VERT/CAVEBBS to MRO on Sat Feb 4 03:28:00 2023
    Re: How far I've come...
    By: MRO to Dumas Walker on Fri Feb 03 2023 05:07 pm

    Re: How far I've come...
    By: Dumas Walker to MRO on Fri Feb 03 2023 03:39 pm

    Now he's a director of engineering in another city. how do these peopl even ep getting work?

    Either people don't check references, or the references lie.


    i think all they can do is really ask a previous employer what their positio

    someone can provide references, but those people would just lie for them usu

    Ya, If you call a company to check on employment, they'll verify the person worked there. I had one manager that told people to never list his home
    number for a reference. A guy that left with short notice used our manager as a reference, and our manager replied, "ya, I know that drunk. Is he still drinking before work?" The employee in question did not drink, but it's not
    a first impression you want to leave an HR person.


    ---
    ■ Synchronet ■ The Cave BBS - Since 1992 - cavebbs.homeip.net
  • From Cougar428@VERT to MARGAERYNNE on Sat Feb 4 05:44:00 2023
    Quoting Margaerynne to Cougar428 <=-

    Without the people who actually create the product, no one else's
    job would really matter would it?

    Manufacturing makes the product, logistics makes it worth something
    At this point, everyone is reliant on everyone else. I'd be useless without manufacturing/research, but they'd be wasting absurd amounts
    of time and energy without proper spreadsheets and automation

    I do my job, they do theirs, and we all benefit.

    You are correct in the scheme of things of course, but I stand by
    what I said. You can't put the chicken before the egg. Without the
    product being made in the first place, the logistics and the rest of
    the chain would not be needed.

    I don't mean that in the manufacturing environment that logistics
    and everything else is not needed, just that the actual people
    creating the product are just as important as the rest. If I
    understand you correctly - that was also your point.

    Thanks!

    Cougar



    ... Correct me if I'm wrong, everybody else does.

    ___ Blue Wave/QWK v2.20
    ---
    ■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net
  • From MRO@VERT/BBSESINF to Moondog on Sat Feb 4 14:39:51 2023
    Re: How far I've come...
    By: Moondog to MRO on Sat Feb 04 2023 03:28 am

    Ya, If you call a company to check on employment, they'll verify the person worked there. I had one manager that told people to never list his home number for a reference. A guy that left with short notice used our manager as a reference, and our manager replied, "ya, I know that drunk. Is he still drinking before work?" The employee in question did not drink, but it's not
    a first impression you want to leave an HR person.

    well he's an idiot. he can be sued for libel. or someone can just break his legs. if someone gave me a bad reference i would pay them a visit.

    one time i did use a crazy friend at work as a reference and i told him jokingly to only say good thing. he like a robot said he would only tell the truth. now i screwed off at work but always got the job done in grade form. but this guy was a bit of a wingnut and i regretted using him as a reference.

    now i just use my old subcontractors or i just dont fill it out. it's a stupid practice, anyways.
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Moondog@VERT/CAVEBBS to Cougar428 on Sun Feb 5 11:17:00 2023
    Re: How far I've come...
    By: Cougar428 to MARGAERYNNE on Sat Feb 04 2023 05:44 am

    Quoting Margaerynne to Cougar428 <=-

    Without the people who actually create the product, no one else's
    job would really matter would it?

    Manufacturing makes the product, logistics makes it worth something
    At this point, everyone is reliant on everyone else. I'd be useless without manufacturing/research, but they'd be wasting absurd amounts
    of time and energy without proper spreadsheets and automation

    I do my job, they do theirs, and we all benefit.

    You are correct in the scheme of things of course, but I stand by
    what I said. You can't put the chicken before the egg. Without the
    product being made in the first place, the logistics and the rest of
    the chain would not be needed.

    I don't mean that in the manufacturing environment that logistics
    and everything else is not needed, just that the actual people
    creating the product are just as important as the rest. If I
    understand you correctly - that was also your point.

    Thanks!

    Cougar



    ... Correct me if I'm wrong, everybody else does.

    ___ Blue Wave/QWK v2.20


    A product needs demand from a customer base. A product is worth what the customer is willing to pay for it. Each time some dummy shoots a bunch of people, ammo or magazine prices go up. They eventually go up to ridiculous prices where most people won't buy them, however the owners will persist to gouge in the hopes someone will deviate from the norm and have to have an
    item regardless of cost.

    ---
    ■ Synchronet ■ The Cave BBS - Since 1992 - cavebbs.homeip.net
  • From Moondog@VERT/CAVEBBS to MRO on Sun Feb 5 11:54:00 2023
    Re: How far I've come...
    By: MRO to Moondog on Sat Feb 04 2023 02:39 pm

    Re: How far I've come...
    By: Moondog to MRO on Sat Feb 04 2023 03:28 am

    Ya, If you call a company to check on employment, they'll verify the pers worked there. I had one manager that told people to never list his home number for a reference. A guy that left with short notice used our manag as a reference, and our manager replied, "ya, I know that drunk. Is he still drinking before work?" The employee in question did not drink, but it's not
    a first impression you want to leave an HR person.

    well he's an idiot. he can be sued for libel. or someone can just break his

    one time i did use a crazy friend at work as a reference and i told him joki
    wingnut and i regretted using him as a reference.

    now i just use my old subcontractors or i just dont fill it out. it's a stu

    I'm curious if an employer would inform a candidate of the name of a person
    who gives them a bad reference? Let's say it's less humorous, like the guy
    got fired because he disregarded a safety procedure that could've injured or killed several people?

    ---
    ■ Synchronet ■ The Cave BBS - Since 1992 - cavebbs.homeip.net
  • From MRO@VERT/BBSESINF to Moondog on Sun Feb 5 17:58:34 2023
    Re: How far I've come...
    By: Moondog to MRO on Sun Feb 05 2023 11:54 am

    now i just use my old subcontractors or i just dont fill it out. it's a stu

    I'm curious if an employer would inform a candidate of the name of a person who gives them a bad reference? Let's say it's less humorous, like the guy got fired because he disregarded a safety procedure that could've injured or killed several people?


    i only know of one time where a guy was going to be hired and he wasn't because of a bad reference. The reference totally fucked over the guy in some way and he was not hired.

    I don't think HR names names in these cases.
    ---
    ■ Synchronet ■ ::: BBSES.info - free BBS services :::
  • From Cougar428@VERT to MOONDOG on Tue Feb 7 23:18:00 2023
    Quoting Moondog to Cougar428 <=-

    A product needs demand from a customer base. A product is worth what
    the customer is willing to pay for it. Each time some dummy shoots a bunch of people, ammo or magazine prices go up. They eventually go up
    to ridiculous prices where most people won't buy them, however the
    owners will persist to gouge in the hopes someone will deviate from the norm and have to have an item regardless of cost.

    Kind of like when .22lr ammo was almost unobtainable - UNLESS you
    wanted to pay 9mm prices.

    After 3 years the price came back down. I'm just a plinker, but
    ammo was a big problem for me when that was happening. I just
    target shoot...

    I went dry there as I would not pay what they were asking. Just my
    experience and opinion.

    I get what you are saying though...

    Cougar

    ... We're lost but we're making good time.

    ___ Blue Wave/QWK v2.20
    ---
    ■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net
  • From Moondog@VERT/CAVEBBS to Cougar428 on Wed Feb 8 14:57:00 2023
    Re: How far I've come...
    By: Cougar428 to MOONDOG on Tue Feb 07 2023 11:18 pm

    Quoting Moondog to Cougar428 <=-

    A product needs demand from a customer base. A product is worth what the customer is willing to pay for it. Each time some dummy shoots a bunch of people, ammo or magazine prices go up. They eventually go up to ridiculous prices where most people won't buy them, however the owners will persist to gouge in the hopes someone will deviate from the norm and have to have an item regardless of cost.

    Kind of like when .22lr ammo was almost unobtainable - UNLESS you
    wanted to pay 9mm prices.

    After 3 years the price came back down. I'm just a plinker, but
    ammo was a big problem for me when that was happening. I just
    target shoot...

    I went dry there as I would not pay what they were asking. Just my experience and opinion.

    I get what you are saying though...

    Cougar

    ... We're lost but we're making good time.

    ___ Blue Wave/QWK v2.20

    The best way to keep shooting is so stack it high and deep when the price is cheap. At one time I used to grab a semi brick of 550 rounds of .22 at
    Walmart because their bulk price beat out any of the local gun shops. If I'm buying a pair of socks or some shirts, I'd grab a box of .22. If I'm buying groceries, a trick to the sporting goods counter was justifialble. Over some time I built up a stash to shhot through and stopped picking ammo up. Prices had jumped considerably and I wished I would've kept buying cheaper ammo.

    ---
    ■ Synchronet ■ The Cave BBS - Since 1992 - cavebbs.homeip.net
  • From Dumas Walker@VERT/CAPCITY2 to COUGAR428 on Wed Feb 8 16:29:00 2023
    After 3 years the price came back down. I'm just a plinker, but
    ammo was a big problem for me when that was happening. I just
    target shoot...

    +1.

    I went dry there as I would not pay what they were asking. Just my experience and opinion.

    Also +1. I did find some on special and bought the limit, which was not
    much.


    * SLMR 2.1a * Justice is lost, Justice is raped, Justice is gone.

    ---
    ■ Synchronet ■ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP