1. Forum
  2. VKRadio
  3. VK ECHOIRLP

  • SPAM: [echoirlp] CLI help neded

    From WA3KOK Larry@432:1/101 to echoirlp@groups.io on Sun Oct 23 07:37:32 2022
    Hi Group,
    I am running a pi EchoIRLP Node. (Dave Cameron Supplied) Node runs fine so far for some time. I can connect to other nodes from radio with no problem. When I log in to the node via SSH and bring up the Echolink command prompt and try to connect (.connect XXXX) xxxx is node number I get no response back. If I invoke the .users command it indeed shows the node I connected to but the node is in fact not connected. I checked the echolink console of the node I tried to connect to and no joy it shows no connection. If I connect from my iphone it connects and shows my connection in the .users command . This is the first time I tried to connect to another echolink station via the CLI so not sure what I may be doing wrong.

    Thanks for the help

    Larry WA3KOK.


    -=-=-=-=-=-=-=-=-=-=-=-
    Groups.io Links: You receive all messages sent to this group.
    View/Reply Online (#303): https://groups.io/g/echoirlp/message/303
    Mute This Topic: https://groups.io/mt/94515335/3738798
    Group Owner: echoirlp+owner@groups.io
    Unsubscribe: https://groups.io/g/echoirlp/leave/11197405/3738798/232177168/xyzzy [vk_echoirlp@freeway.apana.org.au]
    -=-=-=-=-=-=-=-=-=-=-=-



    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (432:1/101)
  • From Tony Langdon@432:1/101 to echoirlp@groups.io on Mon Oct 24 07:37:28 2022
    On 24/10/22 1:37 am, WA3KOK Larry wrote:
    Hi Group,
    I am running a pi EchoIRLP Node. (Dave Cameron Supplied) Node runs fine so far for some time. I can connect to other nodes from radio with no problem. When I log in to the node via SSH and bring up the Echolink command prompt and try to connect (.connect XXXX) xxxx is node number I get no response back. If I invoke the .users command it indeed shows the node I connected to but the node is in fact not connected. I checked the echolink console of the node I tried to connect to and no joy it shows no connection. If I connect from my iphone it connects and shows my connection in the .users command . This is the first time I tried to connect to another echolink station via the CLI so not sure what I may be doing wrong.

    You need to use the IRLP mechanisms to make the connection, to ensure
    that the system state is consistent.  For example:

    decode xxxxxxxxx

    If # is your Echolink prefix and you're connecting to node 12345. you'd use

    decode P12345

    Or you can use the echo_call script

    echo_call 12345

    There is one exception to this rule - if you're already connected to an Echolink node, and want to connect to another (if you're configured to
    allow multiple connections), then you would use tbdcmd to make the
    additional connection.

    --
    73 de Tony VK3JED/VK3IRL
    http://vkradio.com



    -=-=-=-=-=-=-=-=-=-=-=-
    Groups.io Links: You receive all messages sent to this group.
    View/Reply Online (#304): https://groups.io/g/echoirlp/message/304
    Mute This Topic: https://groups.io/mt/94515335/3738798
    Group Owner: echoirlp+owner@groups.io
    Unsubscribe: https://groups.io/g/echoirlp/leave/11197405/3738798/232177168/xyzzy [vk_echoirlp@freeway.apana.org.au]
    -=-=-=-=-=-=-=-=-=-=-=-



    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (432:1/101)
  • From WA3KOK Larry@432:1/101 to echoirlp@groups.io on Sun Oct 23 16:32:56 2022
    Thanks All for the help
    . I was expecting a more complicated solution but as always I should have looked for the simple solution . Logging in as repeater and using the decode command preceding the node number with a S was the answer. Anyone have a rag I can wipe the egg off my face .
    73
    Larry
    WA3KOK


    -=-=-=-=-=-=-=-=-=-=-=-
    Groups.io Links: You receive all messages sent to this group.
    View/Reply Online (#305): https://groups.io/g/echoirlp/message/305
    Mute This Topic: https://groups.io/mt/94515335/3738798
    Group Owner: echoirlp+owner@groups.io
    Unsubscribe: https://groups.io/g/echoirlp/leave/11197405/3738798/232177168/xyzzy [vk_echoirlp@freeway.apana.org.au]
    -=-=-=-=-=-=-=-=-=-=-=-



    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (432:1/101)
  • From Tony Langdon@432:1/101 to echoirlp@groups.io on Mon Oct 24 11:21:25 2022
    On 24/10/22 10:32 am, WA3KOK Larry wrote:
    Thanks All for the help
    . I was expecting a more complicated solution but as always I should have looked for the simple solution . Logging in as repeater and using the decode command preceding the node number with a S was the answer. Anyone have a rag I can wipe the egg off my face .

    Happy to help, yeah that emulates what happens when a user uses DTMF. :)

    --
    73 de Tony VK3JED/VK3IRL
    http://vkradio.com



    -=-=-=-=-=-=-=-=-=-=-=-
    Groups.io Links: You receive all messages sent to this group.
    View/Reply Online (#306): https://groups.io/g/echoirlp/message/306
    Mute This Topic: https://groups.io/mt/94515335/3738798
    Group Owner: echoirlp+owner@groups.io
    Unsubscribe: https://groups.io/g/echoirlp/leave/11197405/3738798/232177168/xyzzy [vk_echoirlp@freeway.apana.org.au]
    -=-=-=-=-=-=-=-=-=-=-=-



    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (432:1/101)