src/sbbs3 prntfile.cpp 1.40 1.41
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv12380

Modified Files:
prntfile.cpp
Log Message:
Fix bug reported by Nelgin in printfile(), when called with-OUT the P_OPENCLOSE mode flag, an EOF @-code would not stop the output since it calls putmsg()
for *each* line of the file and was not checking the return value of putmsg() for an abnormal/early-termination indicator.

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

src/sbbs3 prntfile.cpp 1.42 1.43
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv20164

Modified Files:
prntfile.cpp
Log Message:
Keep Deuce from killing Vert by viewing 16GB log files:
Don't use P_OPENCLOSE printfile() mode for any files > 2MB in size.

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

src/sbbs3 prntfile.cpp 1.43 1.44
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv10676

Modified Files:
prntfile.cpp
Log Message:
Make printtail() not load entire files into memory, but instead read the last part of the file, assuming lines are not >8K (on average).

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

https://gitlab.synchro.net/sbbs/sbbs/-/commit/a5b344c97eebf2879f563371
Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
Convert menu paths (e.g. /sbbs/text/menu/../filename) to full paths

If text/menu is a symlink (on *nix), then the path above would actually
point to a filename in the parent of the symlink target, which is not
what we want (we want the filename in the text dir). Fixed by using
FULLPATH.
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

https://gitlab.synchro.net/main/sbbs/-/commit/bba2a9d5f6426be4cec140f8
Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
Don't print a CRLF in printfile() (called by menu) if no file exists

printfile() assumes you want the file displayed starting in column 0, so will send a CRLF to insure that it does (unless the P_NOCRLF mode flag is specified). But this CRLF printing was happening before the file was opened and when the P_NOERROR mode flag is specified, this should be a silent failure with no print output. So move the CRLF printing to *after* the file is opened.

This expose an issue in the latest xtrn_sec.js where it makes several calls to bbs.menu() with the P_NOERROR mode flag set, expecting nothing to happen if/when the optional display files (e.g. xtrn*_tail.*) don't exist.

Reported by JC via IRC.
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: src/sbbs3/prntfile.cpp
By: Rob Swindell to Git commit to main/sbbs/master on Sat Dec 05 2020 07:26 pm

https://gitlab.synchro.net/main/sbbs/-/commit/bba2a9d5f6426be4cec140f8 Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
Don't print a CRLF in printfile() (called by menu) if no file exists

printfile() assumes you want the file displayed starting in column 0, so will send a CRLF to insure that it does (unless the P_NOCRLF mode flag is specified). But this CRLF printing was happening before the file was opened and when the P_NOERROR mode flag is specified, this should be a silent failure with no print output. So move the CRLF printing to *after* the file is opened.

This expose an issue in the latest xtrn_sec.js where it makes several calls to bbs.menu() with the P_NOERROR mode flag set, expecting nothing to happen if/when the optional display files (e.g. xtrn*_tail.*) don't exist.

Reported by JC via IRC.

Correction: reported by Dan_C.
--
digital man

Synchronet/BBS Terminology Definition #49:
MODEM = Modulator/Demodulator
Norco, CA WX: 60.5°F, 22.0% humidity, 0 mph S wind, 0.00 inches rain/24hrs
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

https://gitlab.synchro.net/main/sbbs/-/commit/479bd24c574ad0dbe6461d09
Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
De-dupe random menu filenames by truncating at first dot, rather than last.

Fix for one of the problems described in issue #380.

bbs.menu("random*"); would display column-width-specific files (e.g. random.132col.msg) even when they weren't appropriate for the current
user terminal width.

This is fixed by truncating the filenames matching the requested pattern at their first-dot rather than the last.

The downside is, you can't have a set of random.#.* files, where # is the unique part of the filename and * is the file-type extension. Just use
the naming pattern "random-#.*" instead (or something similar) instead.
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

https://gitlab.synchro.net/main/sbbs/-/commit/a8db694b2acee8cc66221bea
Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
Use text/menu/*.###col.* display files for even-wider terminals

e.g. display basename.132col.msg even if the terminal is 133+ columns wide.

Fixes issue #380.
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

https://gitlab.synchro.net/main/sbbs/-/commit/e3ba24274983408008b1bf32
Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
Revert to *.XXcol.* being an exact column width, add *.cXX.* support

That previous commit made all *.40col.msg files display for 80 column users. Not my intention.

So revert to the previous behavior of *.XXcol.* display files. I didn't want to go renaming a bunch of menu files as a result of the previous commit and I didn't want a bunch of sysops with *.XXcol.* files to be suddenly surprised at their new BBS behavior.

And introduce a new file naming convention, *.cXX.* (where XX is a MINIMUM column width). This is the same naming convention used by Mystic, which also treats it is as a minimum terminal width, not a required exact width.
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

https://gitlab.synchro.net/main/sbbs/-/commit/9ac7335f36e51bfd13f953e4
Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
Detect/display menu files, even if only a .ans version exists

I'm so tired of this 30 year old frequently asked question.

If a sysop really wants their Synchronet BBS to only work correctly for ANSI users, I suppose that should be their prerogative.

I always felt that by not detecting/displaying menu files when the minimum set of files was not present, I was helping sysops to identify an issue with their system (which would not work correctly for non-ANSI users). *And* I always felt that having a single menu/display file that correctly supported both ANSI and non-ANSI users was a nice convenience (who really wants to maintain multiple versions of their menu files?). But I'm so tired of answering this question, I just give up.

Hopefully this doesn't break anything for anyone. <shrug>
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: src/sbbs3/prntfile.cpp
By: Rob Swindell to Git commit to main/sbbs/master on Fri Mar 25 2022 12:37 am

I'm so tired of this 30 year old frequently asked question.

If a sysop really wants their Synchronet BBS to only work correctly for ANSI users, I suppose that should be their prerogative.
I always felt that by not detecting/displaying menu files when the minimum set of files was not present, I was helping sysops to identify an issue with their system (which would not work correctly for non-ANSI users). *And* I always felt that having a single menu/display file that correctly supported both ANSI and non-ANSI users was a nice convenience (who really wants to maintain multiple versions of their menu files?). But I'm so tired of answering this question, I just give up.

thanks for giving up.
---
■ Synchronet ■ ::: BBSES.info - free BBS services :::

Re: src/sbbs3/prntfile.cpp
By: MRO to Rob Swindell on Fri Mar 25 2022 05:31 am

thanks for giving up.

I feel for the dozens of PETSCII terminal users that might be impacted.
Oh well. :-)
--
digital man (rob)

This Is Spinal Tap quote #20:
Well, I'm sure I'd feel much worse if I weren't under such heavy sedation. Norco, CA WX: 81.9°F, 28.0% humidity, 5 mph ESE wind, 0.00 inches rain/24hrs ---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: src/sbbs3/prntfile.cpp
By: Digital Man to MRO on Fri Mar 25 2022 12:35 pm

Re: src/sbbs3/prntfile.cpp
By: MRO to Rob Swindell on Fri Mar 25 2022 05:31 am

thanks for giving up.

I feel for the dozens of PETSCII terminal users that might be impacted.
Oh well. :-)

maybe have it do a special entry in the log file.
---
■ Synchronet ■ ::: BBSES.info - free BBS services :::

Re: src/sbbs3/prntfile.cpp
By: MRO to Digital Man on Fri Mar 25 2022 03:26 pm

Re: src/sbbs3/prntfile.cpp
By: Digital Man to MRO on Fri Mar 25 2022 12:35 pm

Re: src/sbbs3/prntfile.cpp
By: MRO to Rob Swindell on Fri Mar 25 2022 05:31 am

thanks for giving up.

I feel for the dozens of PETSCII terminal users that might be impacted. Oh well. :-)

maybe have it do a special entry in the log file.

I'm thinking just have chksetup.js detect/report when a menu set is missing a .asc or .msg version.
--
digital man (rob)

Synchronet/BBS Terminology Definition #24:
DOVE = Domain/Vertrauen
Norco, CA WX: 85.1°F, 32.0% humidity, 7 mph SSE wind, 0.00 inches rain/24hrs ---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

https://gitlab.synchro.net/main/sbbs/-/commit/519459c5e1197bd66262b3d5
Modified Files:
src/sbbs3/prntfile.cpp
Log Message:
De-duplicate at the first '.' following the filename, not the path

Fix the fix to issue #380.

Thanks for letting me know Keyop.
---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net